Angle bracket type A - ANGL-WOCON-A-BAR-90X90X65X2,5

Angle bracket type A - ANGL-WOCON-A-BAR-90X90X65X2,5 - 1

Angle bracket type A

Name: Angle bracket type A
Brand: Würth Portugal
SKU: 0681090965

Angle connector, type A with web
ANGL-WOCON-A-BAR-90X90X65X2,5

Art.-no. 0681090965

EAN 4052703996469

All versions

Similar products

Prices for customers after login

Angle bracket type A

Art.-no. 0681090965

Prices for customers after login

Quantity

x 1 pcs

Show availability in Würth Portugal trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +351 211 989 840

Angle brackets A with reinforcement rib are ideal for high-quality load-bearing wood/wood and wood/concrete connections in timber construction. Universally suitable for standard connections such as intersecting timbers.

Sheet metal hot-dip galvanised on both sides (DX51D + Z275 [approx. 20 µm]) in line with EN 10327:2004

Application in utilisation classes 1 and 2 in line with EN 1995:2013

Proof of Performance

European Technical Approval ETA-09/214

Notice

The transverse load of the connected timbers must be observed and verified where necessary. Transverse reinforcement can be added using ASSY plus VG full-thread screws.

Diameter of bolt/screw/metal anchor may only be max. 2 mm smaller than the diameter of the hole.

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

Application area

European Technical Approval ETA-09/214

Product information

Würth Portugal Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Load-bearing connections of timber joists to wood such as joist to joist and purlin to joist.

Instructions

Suitable fasteners:

Ring-shank/ribbed nail in line with EN 14592: 4.0 x 40 mm

ASSY 3.0 Combi in line with ETA 11/0190: d = 12 mm

Bolts and metal anchors in accordance with manufacturers' specifications: d = 12 mm


Type	A
Width x height x depth	65 x 90 x 90 mm
Thickness	2.5 mm
Design	With bar
Number of D 13 mm holes in subcarrier nJ/main carrier nH	1 + 1 PCS
Number of D 5 mm holes in subcarrier nJ + main carrier nH	10 + 10 PCS
Approval	ETA-09/0214
Product weight (per item)	202.520 g
Material	Steel
Surface	Hot dip galvanized
Weight	197 g
Material designation	DX51D
Material standard	DIN EN 10327:2004
Number of D 5 mm holes	20 PCS
Number of D 13 mm holes	2 PCS

Characteristic load-bearing capacities in kN; 1 piece angle bracket type A with Würth ring-shank nails
Angle bracket type A		Article number	ETA	Anchor nail in	1 angle bracket type A for each connection 3)
Angle bracket type A					F1,Rk		F2/3,Rk	F4,Rk		F5,Rk
Width x length x depth in mm					Wood	Steel	Wood	Wood	Steel	Wood	Steel
Width x length x depth in mm				mm	kN	kN	kN	kN	kN	kN	kN
Without rib	35x50x50x2.5	0681 050 040	09/0216	4x40	1.101)	0.921)	1,31	---	---	---	---
	40x90x90x3.0	0681 090 040	09/0216	4x40	1,21	1,14	2,40	---	---	---	---
	55x70x70x2.5	0681 070 055	09/0214	4x40	1,58	0,92	2,90	---	---	---	---
	65x90x90x2.5	0681 090 065	09/0214	4x40	2,50	1,38	3,67	---	---	---	---
	90x105x105x3.0	0681 100 090	09/0214	4x40	3,76	2,28	5,94	---	---	---	---
	55x70x70x2.5	5390 200 070	08/0183	4x40	1,53	0,78	3,79	---	---	---	---
	65x90x90x2.5	5390 200 090	08/0183	4x60	4,04	1,17	4,78	---	---	---	---
	90x105x105x3.0	5390 200 105	08/0183	4x60	4,05	2,25	6,40	---	---	---	---
With rib	65x90x90x2.5	0681 090 965	09/0214	4x40	1,25	3,15	3,53	7,03	3,66	1,98	1,17
	90x105x105x3.0	0681 100 990	09/0214	4x40	2,51	7,91	5,06	9,96	9,21	2,95	4,82
	55x70x70x2.5	5390 201 070	08/0183	4x40	1,58	2,29	2,75	The load-bearing capacity depends on the geometry of the connected component ⁴⁾, see tables F₄ and F₅
	65x90x90x2.5	5390 201 090	08/0183	4x60	3,23	4,30	4,20
	90x105x105x3.0	5390 201 105	08/0183	4x60	5,90	7,00	4,80
	55x70x70x1.5	5390 202 070	08/0183	4x60	5,40	---	6,35	---	---	---	---
	65x90x90x1.5	5390 202 090	08/0183	4x60	4,90	---	6,10	---	---	---	---
	90x105x105x1.5	5390 202 105	08/0183	4x60	9,20	---	8,50	---	---	---	---
³⁾ If one angle bracket is used for each connection, the connected component must be secured against twisting. ⁴⁾ The loads F4 and F5 act on the top edge of the connected component. Securing against twisting is not required. The specified load-bearing capacities apply to softwood at 350 kg/m³ ≤Ƥ_k ≤420 kg/m³. For woods with 290 kg/m³ ≤ Ƥ_k ≤ 350 kg/m³, the specified load-bearing capacities for wood must be multiplied by the factor kdens: t_Steel ≥ 2.5 mm: k_dens = (pk/350)^2 t_steel = 1.5 mm: k_dens= (pk/350)^0.8 Design values of the load-bearing capacities: F_i,Rd= min {F_i,wood,Rd; F_i,steel,Rd} Failure of fasteners in wood: F_i,Wood,Rd= k_mod/Ƴ_M,Wood × F_i,Wood,Rkwith Ƴ_M,Wood = 1.3 Steel failure of the connector: F_i,steel,Rd = F_i,steel,Rk/Ƴ_M,steelwith Ƴ_M,steel = 1.25 For several simultaneous loads, the following condition must be met: The specified nailing patterns must be observed in accordance with the relevant ETA.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Characteristic load-bearing capacities in kN; 1 piece angle bracket type A with Würth ring-shank nails
Table F4		F_4,Wood,Rk; F_4,Steel,Rk in kN⁴⁾
Table F5:		F_5,Wood,Rk; F_5,Steel,Rk in kN⁴⁾
Angle bracket	Width b in cm	Height h in cm
Angle bracket	Width b in cm	8	10	12	14	16	20
Height h in cm		8	10	12	14	16	20
55x70x70x2.5 mm (Art. no. 5390 201 070)		0.82; 0.38	0.66; 0.28	---	0.47; 0.21	---	---
65x90x90x2.5 mm (Art. no. 5390 201 090)		---	---	1.11; 0.46	0.95; 0.40	0.84; 0.35	---
90x105x105x3.0 mm (Art. no. 5390 201 105)		---	---	2.42; 1.02	---	1.82; 0.69	1.37; 0.52
55x70x70x2.5 mm (Art. no. 5390 201 070)	6	1.58; 0.93	1.73; 1.12	---	2.45; 1.06	---	---
	10	1.44; 1.30	1.58; 1.19	---	1.56; 1.26	---	---
	14	1.45; 1.29	1.47; 1.28	---	1.48; 1.26	---	---
65x90x90x2.5 mm (Art. no. 5390 201 090)	8	---	---	3.85; 1.83	4.24; 1.72	4.89; 1.62	---
	10	---	---	3.49; 1.98	3.65; 1.90	3.88; 1.82	---
	14	---	---	3.23; 2.12	3.30; 2.08	3.37; 2.03	---
90x105x105x3.0 mm (Art. no. 5390 201 105)	8	---	---	5.94; 3.14	---	5.45; 2.67	4.68; 2.30
	10	---	---	5.24; 3.55	---	6.09; 3.13	5.27; 2.80
	14	---	---	4.68; 3.99	---	5.00; 3.72	5.35; 3.47
³⁾ If one angle bracket is used for each connection, the connected component must be secured against twisting. ⁴⁾ The loads F4 and F5 act on the top edge of the connected component. Securing against twisting is not required. For woods with 290 kg/m³ ≤ Ƥ_k < 350 kg/m³, the specified load-bearing capacities for wood must be multiplied by the factor kdens: tSteel ≥ 2.5 mm: k_dens = (pk/350)^2 tSteel = 1.5 mm: k_dens = (pk/350)^0.8 Design values of the load-bearing capacities: F_i,Rd= min {F_i,wood,Rd; F_i,steel,Rd} Failure of fasteners in wood: F_i,Wood,Rd= k_mod/Ƴ_M,Wood × F_i,Wood,Rkwith Ƴ_M,Wood = 1.3 Steel failure of the connector: F_i,steel,Rd = F_i,steel,Rk/Ƴ_M,steelwith Ƴ_M,steel = 1.25 For several simultaneous loads, the following condition must be met: The specified nailing patterns must be observed in accordance with the relevant ETA.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Characteristic load-bearing capacities in kN; 2 piece angle bracket type A with Würth ring-shank nails
Angle bracket type A		Article number	ETA	Anchor nail	2 angle brackets type A for each connection
Width x length x depth					F_1,Rk		F_2/3,Rk	F_4/5,Rk²⁾
					Wood	Steel	Wood	Wood	Steel
				(mm)	kN	kN	kN	kN	kN
Without rib	35x50x50x2.5	0681 050 040	09/0216	4.0x40	2.191)	1.841)	2,63	6,99	2,00
	40x90x90x3.0	0681 090 040	09/0216	4.0x40	2,41	2,28	4,80	4,13	4,28
	55x70x70x2.5	0681 070 055	09/0214	4.0x40	3,15	1,84	5,80	5,34	4,34
	65x90x90x2.5	0681 090 065	09/0214	4.0x40	5,00	2,77	7,34	7,82	4,45
	90x105x105x3.0	0681 100 090	09/0214	4.0x40	7,52	4,55	11,90	9,30	8,46
	55x70x70x2.5	5390 200 070	08/0183	4.0x40	3,05	1,56	7,57	6,10	3,63
	65x90x90x2.5	5390 200 090	08/0183	4.0x60	8,07	2,34	9,55	9,67	3,99
	90x105x105x3.0	5390 200 105	08/0183	4.0x60	8,09	4,50	12,80	10,60	7,98
With rib	65x90x90x2.5	0681 090 965	09/0214	4.0x40	2,50	6,31	7,06	7,03	4,17
	90x105x105x3.0	0681 100 990	09/0214	4.0x40	5,01	15,80	10,10	9,96	13,10
	55x70x70x2.5	5390 201 070	08/0183	4.0x40	3,16	4,57	5,49	5,65	4,12
	65x90x90x2.5	5390 201 090	08/0183	4.0x60	6,46	8,59	8,39	8,91	6,55
	90x105x105x3.0	5390 201 105	08/0183	4.0x60	11,80	14,00	9,60	11,90	11,80
	55x70x70x1.5	5390 202 070	08/0183	4.0x60	10,80	---	12,70	11,00	---
	65x90x90x1.5	5390 202 090	08/0183	4.0x60	9,80	---	12,20	13,50	---
	90x105x105x1.5	5390 202 105	08/0183	4.0x60	18,40	---	17,00	16,40	---
¹⁾ Only for purlin connections. ²⁾ For the load F_4/5, the additional force ΔF_1,d = F_4/5,d× e/b must be taken into consideration. The specified load-bearing capacities apply to softwood at 350 kg/m³ ≤Ƥ_k ≤420 kg/m³. For woods with 290 kg/m³ ≤ Rk < 350 kg/m³, the specified load-bearing capacities for wood must be multiplied by the factor k_dens: tSteel ≥ 2.5 mm: k_dens= (pk/350)^2 tSteel = 1.5 mm: k_dens = (pk/350)^0.8 Design values of the load-bearing capacities: F_i,Rd= min {F_i,wood,Rd; F_i,steel,Rd} Failure of fasteners in wood: F_i,Wood,Rd= k_mod/Ƴ_M,Wood × F_i,Wood,Rkwith Ƴ_M,Wood = 1.3 Steel failure of the connector: F_i,steel,Rd = F_i,steel,Rk/Ƴ_M,steelwith Ƴ_M,steel = 1.25 For several simultaneous loads, the following condition must be met: The specified nailing patterns must be observed in accordance with the relevant ETA.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Fitting products for your order

Angle bracket type A