Bond additive PU ADITOR
Bond additive PU ADITOR
PRIM-PU-(ADITOR-PLUS)-TRANSP-0,25KG
Register now and access more than 15,100 products
Properties
PU ADITOR forms a bridge between the paint binder and the substrate, ensuring better bonding of the waterproofing agent to the substrate/support.
Limitations
Some supports, due to their surface bonding characteristics, have limitations due to their non-stick nature, such as PP, PE, EPDM etc. These supports require special surface treatment.
This information is a recommendation only, based on our experience. However, we cannot accept liability for individual results with this product due to the multiple possible applications and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.
Datasheets(X)
The product acts as a binder between the waterproofing agent and the substrate. Improves the bonding of solvent-based or water-based waterproofing agents to very smooth supports, such as:
- Glass
- Ceramic
- Enamels
- Non-porous
1% by weight of paint/waterproofing agent.
One 250-g container of PU ADITOR should be added to 25 kg of paint/polyurethane waterproofing agent.
Small clots may form when incorporating the product into the paint/waterproofing agent, due to a high local concentration. Simple agitation is enough to properly homogenise the paint.
Mix with a low-speed mixer.
Contents | 0.255 l |
Colour | Transparent |
Chemical basis | Alcohol with additives |
Solvent-free | Yes |
Min./max. processing temperature | 5 to 35 °C |
Can be further processed after min. | 1 h |
Further processing conditions | at 20°C |
Weight of content | 0.25 kg |