Carbide milling bit with aluminium teeth
Tungsten carbide bur CYL with spur cut ZrN-ALU
MILBIT-CYL-TC-ZYAS-ALU-ZENIT-D12-WL25
ZEBRA
![](https://media.wuerth.com/source/eshop/stmedia/wuerth/images/std.lang.all/resolutions/category/78px/1333430.jpg)
Register now and access more than 15,100 products
For coarse machining for high degree of material removal coupled with a very high surface quality.
Reduced material build-up and long service life
The innovative ZENIT (ZrN) layer greatly reduces the formation of a built-up edge.
Outstanding chip volume with high chipping performance
thanks to application-optimised cutting geometry.
Quiet operation at high cutting speeds
The aluminium teeth work optimally up to a cutting speed (Vc) of 1100 m/min while producing little noise.
ZENIT (ZrN) coating
Wear protection coating with a hardness of 3000 HV and a heat resistance up to 800°C.
Datasheets(X)
Suitable for processing contours, deburring internal holes, milling out for preparation of deposit welds, milling work (deburring, processing welded seams, contour processing etc.), as well as for small and delicate components in machine construction and mould and model making.
For the correct rotation speed (n) and cutting speed (Vc) for the material to be processed, please refer to the application table.
Form | Cylindrical shape with spur cut |
Length | 65 mm |
Shank diameter | 6 mm |
Teeth type | ALU |
Surface | ZrN |
Service life (points system) | 4 of 4 points |