Welcome to Würth Portugal For trade customers only

Cement adhesive CERAfix® 430C

Cement adhesive CERAfix 430 C2 TE S1
ADH-TLE-CERAFIX-430C-C2TES1-WHITE-25KG

Art.-no. 089035430
EAN 4099618651540

Prices for customers after login
Cement adhesive CERAfix® 430C

Art.-no. 089035430

Prices for customers after login
Quantity
PU

Show availability in Würth Portugal shop
Exclusively for trade customers

Register now and access more than 15,100 products

Single-component cement adhesive, mixed binders, with improved bonding, elongated open time, reduced sliding effect and high level of deformability - C2TES1 (NP EN 12004:2017). Suitable for indoor and outdoor on absorbent and non-absorbent substrates.

Supports


  • Cement base such as plaster, concrete or screed

  • Plaster and dry walling

  • Ceramic or natural stone base

  • The base plate must have completed a curing period of 28 days and be clean, dry and free of dust and grease

  • The base plate should remain at a temperature between 5 and 30 °C and should not hold a surface unevenness greater than 5 mm, otherwise it should undergo regularisation as before

Depending on the condition of the base plate and the thickness of the layer applied: 3.5 to 6 kg/m2 depending on the size of the parts

This information is a recommendation only, based on our experience. However, we cannot accept responsibility for individual results with this product, due to its numerous potential applications and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.

Product information

Würth Portugal Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • Indoor bonding (always double bonding) of ceramic and natural stone up to 1,200 x 600 mm on plaster, concrete and cement sill membranes or up to 1,200 x 900 mm on screed floors or underfloor heating or up to 600 x 600 mm on garage floors

  • Outdoor bonding (always double bonding) of ceramic and natural stone up to 800 x 500 x 15 mm on or 500 x 15 mm on façades less than 6 m or flooring up to 800 x 800 mm on screed floors and cement sill membranes and ceramic sheet up to 1,000 x 1,000 mm
Instructions

Base plate preparation


The base plate should be clean, dry, free of grease and consistent. If bonding is carried out on high-absorption base plates or under unfavourable heat and wind conditions, the base plates must be slightly dampened before applying the cement adhesive.



Mortar preparation


Mix, preferably with a low-speed electric agitator, CERAfix with clean water (22 to 24 % water, i.e. 5.5 to 6 litres of water per bag). Let this paste rest for about 2 minutes, after which it will obtain a creamy and homogeneous consistency and will be ready for application. Use the mixture within 30 minutes.



Placement


Apply CERAfix cement adhesive in the area to be covered, in proportions appropriate for the work pace, using a notched trowel. On this layer, apply the parts to be bonded, adjusting them with a rubber mallet to press the cement adhesive bead, ensuring that the thickness of the cement adhesive between the base plate and the parts is no less than 7 mm after the bead has been pressed. On larger parts or whenever greater efficiency is desired, perform double bonding (part and base plate). For exceptional attachment, it is recommended to staple the parts. Make joints between parts, protecting the coating from expansions and contractions.

Weight of content

25 kg

Chemical basis

Cement and mineral additives

Standards

EN 12004

Colour

White

Min./max. processing temperature

5 to 30 °C

Processing time

3 h

Application conditions

at 23°C and 50% relative humidity

Application quantity in weight/area/conditions

5 kg/m² / depending on the absorbency of the surface

May be walked on after max.

15 d

Groutable after

24 h

Shelf life from production/conditions

12 Month / cool and dry storage area, no exposure to sunlight and weather conditions

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Portugal Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information