Concrete screw W-BS Compact type P with pan head
Concrete screw W-BS/P Compact
ANC-(W-BS/P-COMPACT)-TX30-(A2K)-3-6X28
Register now and access more than 15,100 products
- Quick, easy installation
- Can be assembled by hand
- Economical and efficient mounting solution
3 different head diameters for a versatile application
- Type P with pan head dia. 14 mm
- Type SP with extra-small pan head dia. 10.5 mm
- Type LP with extra-large pan head dia. 17.6 mm
European Technical Assessment ETA-15/0091 for anchors in a redundant non-structural system in concrete:
- Static and quasi-static load
- Fire resistance: R30, R60, R90, R120
Tensile capacity in hollow core concrete slabs - expert report no. 21641 - 2016
- It is preferable to install the W-BS Compact manually
- If a cordless drill driver is used for assembly, at least five preliminary tests should be performed on location to ensure the correct drill driver settings and to prevent over-tightening of the W-BS Compact. It is recommended that you start with the drill driver's lowest torque setting and increase it if necessary
- Do not use a tangential impact driver for installation
Lightweight mounting rails
Create the drill hole
Clean the drill hole
Position anchor
Screw in anchor
European Technical Assessment ETA-15/0091 for anchors in a redundant non-structural system in concrete:
- Static and quasi-static load
- Fire resistance: R30, R60, R90, R120
Tensile capacity in hollow core concrete slabs - expert report no. 21641 - 2016
Datasheets(X)
Anchors in a redundant non-structural system, with European Technical Assessment:
- In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)
- Fastenings under exposure to fire
Suitable for mounting low loads in concrete:
Economical and efficient mounting solution for many electrical, plumbing and HVAC applications or attachments that have to be demountable:
- Type P: Mounting of metal profiles, mounting rails, vernier hangers, sheet metal, etc. in in-place installation
- Type LP with large pan head: Mounting attachments such as mounting rails, profiles, sheet metal, etc. if a large contact surface is required
- Type SP with small pan head: Mounting attachments such as metal multiple cable holders, cable clamps, pipe clamps, cable clips, ceiling hangers, profiles, brackets, etc.
W-BS Compact (zinc-plated steel) may only be used in dry indoor conditions.
 | |
Type description | W-BS Compact type P |
Anchor size | 6 mm |
Thread diameter | 7 mm |
Anchor length (l) | 28 mm |
Head type | Pan head |
Head diameter | 14 mm |
Max. attachment height (t fix) | 3 mm |
Internal drive | TX30 |
Nominal drill-bit diameter (d 0) | 6.0 mm |
Drill hole depth (h 1) | 28 mm |
Surface | Zinc plated |
Material | Steel |
Embedding depth (h nom) | 25 mm |
Minimum component thickness (h min) | 80 mm |
Through-hole in the component to be connected (d f) | 8.0 mm |
Approval | ETA-15/0091 |
Drill cutting diameter (d cut) | 6.40 mm |
| Performance data in concrete - anchors in a redundant non-structural system in accordance with ETA-15/0091 | ||
| Anchor size | [mm] | 6 |
| Nominal length of thread engagement | hnom [mm] ≥ | 25 |
| Admissible load in all load directions in cracked and uncracked concrete C20/25 to C50/601 | Fzul [kN] = | 0,43 |
| Installation parameters in concrete | ||
| Anchor size | 6 | |
| Spacing | scr,N [mm] | 200 |
| Edge distance | ccr,N [mm] | 150 |
| Minimum member thickness | hmin [mm] | 80 |
| Length of anchor in drilled hole | hnom ≥ [mm] | 25 |
| Fixture thickness | tfix [mm] = | l-hnom |
| Nominal drill diameter | d0 [mm] | 6 |
| Cutting edge diameter | dcut ≤ [mm] | 6,35 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!