Glass fibre fleece joint strip
Glass fibre joint cover strip
STR-FBRGLS-FLEECE-50MMX25M
Register now and access more than 15,100 products
Filling and sanding work is reduced
Economical application
Open structure
Filler compound penetrates well
Vapour-permeable and water-permeable
Low absorption of moisture
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For use on coloured render, concrete surfaces with pores, textured render, latex plastic, old non-woven wallpapers
Width | 50 mm |
Thickness | 0.34 mm |
Length | 25 m |