Insulation nail W-IN
Insulation nail W-IN 50mm
DWL-(W-IN)-PLA-D50MM-80-8X100
Art.-no.
0903745010
EAN 4024835025751
Prices for customers after login
Show availability in Würth Portugal trade store
In order to check the stock in a Würth Portugal branch, please log in.
If you have any questions, please call our service hotline at +351 211 989 840.
You are not yet a Würth Portugal customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 15,100 products
For fastening rigid, self-supporting insulating materials, such as polystyrene or hard foam panels in concrete. Design with plate dia. 50 mm
- High-quality PP
- Thermally stable from -40°C to +80°C
- Small drill hole diameter (8 mm)
- Quick, easy installation
- Low insertion depth, min. 20 mm — less time drilling
- Anchor without expansion nail
Drill the hole
Set anchor in place
Fasten insulation, knock in anchor until flush
Product information
Datasheets(X)
Application area
- For attaching insulation materials for façades with rear ventilation
- For attaching film, sealing membrane outside cellars
- Can be used in various solid surfaces, e.g. concrete, solid sand-lime brick, clay brick
- For attaching hard, self-supporting insulation materials, e.g. polystyrene, rigid foam panels
Anchor length (l) (l) | 100 mm |
Max. attachment height (d a) (da) | 80 mm |
Disc diameter | 50 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h s) | 20 mm |
Drill hole depth (t) | 25 mm |
Material | PP - Polypropylene |
Halogen-free | Yes |
| Performance data | |||
| Base diameter [mm] | 50 | ||
| Recommended working load | Concrete ≥ B25 | Frec [kN] | 0,11 |
| Solid calcium silicate block KS12 | 0,10 | ||
| Masonry brick MZ12 | 0,10 | ||
| Characteristic values | |||
| Drill hole depth | t ≥ [mm] | 25 | 25 |
| Embedment depth | hS ≥ [mm] | 20 | 20 |
| Nominal drill diameter | ddrill [mm] | 8 | 8 |