Exclusively for business customers

Hotline 211 989 840

Nearest shop

Fast delivery

Over 15000 Products

Nylon anchor

Nylon anchor
DWL-PLA-10X50

Art.-no. 090310 50

Prices for customers after login

Nylon anchor

Art.-no. 090310 50

Prices for customers after login

Quantity

PU

x50 pcs
Show availability in Würth Portugal trade store

Exclusively for trade customers

Register now and access more than 15,100 products

Plastic anchors for light loads (secondary attachments)
  • High-quality polyamide (nylon)

  • Halogen and silicon free

  • Temperature resistant from -40°C to +80°C

  • The hammer-in stop prevents premature expansion during push-through installation

  • The twist lock prevents turning in the drill hole

  • Wall plug shaft with no expansion pressure prevents damage to plaster and tiles

  • Push-through and cotter-pin installation

  • For mounting, we recommend the ASSY-D plug screw
Notice
  • Drill perforated brick using the rotary drill (without striking tool)

  • The drill cuttings must be removed from the drill hole

  • Screw length = attachment thickness (+plaster/insulation thickness) + anchor length + screw diameter
Application area
  • Plastic anchors for light loads (secondary attachments)

  • Can be used in concrete, solid brick, solid sand-lime brick, hard natural stone

  • Suitable for attaching curtain rails, wall shelves, light wall cupboards, picture frames, cable ducts, cable clamps, electrical switches, towel rails, signs, motion detectors, hanging baskets etc.

  • For attaching components in conjunction with a wood or particle board screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)

  • Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Anchor diameter

10 mm

Anchor length (l)

50 mm

Embedding depth (h nom)

50 mm

Nominal drill-bit diameter (d 0)

10 mm

Required wood screw diameter (d scr.wood)

6 - 8 mm

Required particle-board screw diameter (d scr.particle)

8 mm

Min. required screw diameter

6 mm

Max. required screw diameter

8 mm

Embedding depth (h s)

50 mm

Centre-to-centre distance (a)

100 mm

Edge clearance (a r)

50 mm

Drill hole depth (t)

65 mm

Max. attachment height (d a) - condition

Dependent on screw length

Required screw length (l s)

Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter

Art.-no. ! common.detail.customermaterialnumber !

Hazardous Material

Product information

Würth Portugal Catalogue

Catalogue page as PDF  | 

Abrir no catálogo geral

Datasheets()

Datasheets ()

CAD Data  | 

Certificates/Documents

 | 

 | 

Technical information