Pneumatic impact screwdriver DSS 1/2 inch H
Pneumatic impact wrench DSS 1/2 inch H
IMPWRNCH-PN-(DSS1/2IN-H)
MASTER
Register now and access more than 15,100 products
Perfect weight distribution
Rugged, well-balanced unit in aluminium housing
Very handy and user-friendly
Rubberised and ergonomically designed handle, user-friendly right/left changeover and adjustable trigger
Long service life and virtually vibration-free
High-quality pin impact mechanism in oil bath with 6-disc motor.
- Recommended maximum bolt size: M15
- Impact screwdrivers are not torque screwdrivers. Connections requiring a specific torque must be checked by means of a torque measuring device after tightening with the impact screwdriver.
- The operating torque is the torque usually achieved under average working conditions. It is dependent on the highly varying ambient conditions (air pressure, hose diameter, soiling etc.).
- When used regularly, the machine should be lightly oiled via the pneumatic air supply every day. The use of a mist lubricator is recommended
- Plug-in nipple not included in scope of delivery
2 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Datasheets(X)
Type description | DSS 1/2 inch H |
Tool holding device | 1/2-inch external square |
Max. working torque | 470 Nm |
Max. releasing torque | 569 Nm |
Sound-pressure level | 92 dB |
Vibration | 3.78 m/s² |
Operating pressure | 6.3 bar |
Weight of machine | 2.3 kg |
Min. hose inner diameter | 8 mm |
Air consumption | 102 l/min |
Connection thread | 1/4 inch |
Length x width x height | 195 x 64 x 202 mm |
| Level | Tightening torques Nm (approx. values) | Releasing torque Nm |
| 1 | 70 | Max. 569 |
| 2 | 120 | |
| 3 | 280 | |
| 4 | 470 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!