For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 15,100 products
Variants
Register now and access more than 15,100 products
Call customer service: +351 211 989 840
Prices for customers after login
- Super fast action
- First bonding in 30 seconds
- Suitable for load in just 2 hours
- Maximum resistance after 24 hours
- Gel consistency
- Does not run or drip
- Easy application
- Brush included on cap
- Promotes cold weld on PVC
- Bonded joints maintain the same resistance properties and ageing as rigid PVC
Work in well-ventilated places. If case of contact with the eyes or skin, promptly wash with water and seek medical attention. Keep out of the reach of children. Store in a cool, dry place. Preferably use for one year from the date indicated on the bottom of the packaging.
Bonding of pipes and fittings in rigid and flexible PVC, standard pressure sanitary installation.
Cut the pipe at a right angle and bevel the edge at a 15º angle. Clean and degrease the parts to be bonded using the Würth PVC cleaner, Item No. 892 100 101. Apply the adhesive with a brush from the inside out in an axial direction until it forms a thin layer on both parts. Connect the tube immediately and allow 30 seconds for the first bond to form. Then clean the adhesive residue. No force should be applied on the union for next 2 minutes. Depending on weather conditions, it is suitable for load (1.5 bar) after 2 hours. Maximum resistance is reached after 24 hours. Close the packaging properly after use.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!