Quick action anchor W-DS/S With hooks
Quick action anchor for ceilings W-DS/S
ANC-(W-DS/S)-(A2K)-6X75
Art.-no.
0905363001
EAN 4050641979339
Prices for customers after login
Show availability in Würth Portugal shop
In order to check the stock in a Würth Portugal branch, please log in.
If you have any questions, please call our service hotline at +351 211 989 840.
You are not yet a Würth Portugal customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.


Exclusively for trade customers
Register now and access more than 15,100 products
Quick and easy to fit by hand. For suspension in concrete, zinc-coated steel, with hook
- Quick and easy to fit
- Easier and quicker to drill
- Does not require specialist tool or setting tool
- Easy to fit: Push the anchor in, pull it towards you – done
- Anchors with friction locks – controlled expansion anchor
Proof of Performance
For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490
- Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C
- The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.
- Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)

Create the drill hole

Clean the drill hole

INSERT W-DS/S.

Fully insert W-DS/S.

Pull down the W-DS/S with a jerky movement.
For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490
- Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C
- The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.
- Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)
Product information
Datasheets(X)
Application area
- Suitable for fixing: light ceiling plates and ceilings, ceiling structures with wire hooks, wire suspenders, hanging brackets, strip lighting, light rails, lamps, cables, chains, etc.
- The anchor can only be used indoors in dry and heated rooms.
Performance data |
Characteristic values |