WUTHERM Final 1.5
Medium coating ETICS
THERMINSUCOAT-ETICS-MEDIUM-GRAIN-25KG
Register now and access more than 15,100 products
Properties
An acrylic-based aqueous product that provides excellent outdoor resistance and water repellency. Fine particle size of approximately 1.0 mm and mean of approximately 1.5 mm.
Colours may be requested by special order, for any colour of the NCS catalogue. Colours are produced in colour-tuning systems, so they may vary. Prior testing is advised. The application of strong colours with absorption coefficient >0.7 is not advised since it can lead to cracking and consequent infiltration.
This information is a recommendation only, based on our experience. However, we cannot accept responsibility for individual results with this product, due to its numerous potential applications, and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.
For indoor and outdoor use on cement mortar or concrete substrates and as a finishing for an exterior thermal insulation plan.
Surfaces should be cohesive, free from cracks, dust, grease and contaminants and should be dry. On new supports, wait 28 days for the concrete to completely cure. A coat of Wutherm Primer must be applied, undiluted. On EPS panels or cement insulating mortar, Wutherm Primer should be used between the bonding mortar (Koltherm) and the finish. The product must be homogenised by shaking the packaging. Apply the product pure, without dilution. The support should be at a temperature of around 5ºC above the dew point but should not be hot due to sun exposure. Do not apply the product at an ambient temperature below 7ºC.
Weight of content | 25 kg |
Colour | White |
Grid size | Medium |
Gloss level | Matt |
Density/conditions | 1.62 g/cm³ / at 23°C |
Viscosity | 550000 mPas |
Min./max. processing temperature | 15 to 30 °C |
Min./max. yield (area) | 5-6.9 m² |
Dust-drying time | 5 h |
Min./max. through drying | 18-24 h |
VOC concentration (CH) | 40 g/l |
Water-vapour permeability | 150 g/m²/d |
Conditions for water-vapour permeability | in accordance with DIN EN ISO 7783-2, class V1 |
Resistance to penetration of water | W3 |
Conditions for resistance to penetration of water | in accordance with EN 1062-3 |
Tear-out force | 0.3 N |
Heat conductance λ | 0.82 W/(m*K) |
Building material class/conditions | C - Of low flammability / in accordance with DIN EN 13501-1 |
Shelf life from production/conditions | 2 Years / cool and dry storage area, no exposure to sunlight, 10°C to 30°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
